PDF for

Overview

This compact UHF RFID reader and tag programmer is designed for use in any application requiring an RFID reader with a built in antenna and is packaged for the desktop. It reads tags compliant with EPC Class 1 Gen 2, ISO18000-6C as well as Alien and NXP custom command set. It also supports tag independent 128-type block write for fast encoding. Featuring an integrated circular polarized antenna, this reader provides a read range of about 1 to 12 inches from the surface of the reader depending on the tag. The desktop RFID reader is FCC Part 15 compliant. It uses USB for power supply and data exchange with a host computer.

Key Features

  • Compact size, light weight
  • Features an integrated circular polarized antenna
  • Compliant with EPC Class 1 Gen 2, ISO18000-6C as well as Alien and NXP custom command set
  • 1 to 12 inch read range
  • USB port for power supply and data transfer

Technical Specifications


FrequencyUHF 902 to 928 MHz
ProtocolsEPC Class 1 Gen 2, ISO18000-6C
Alien Custom Command: BlockReadLock()
NXP custom command to control EAS bit features
Tag independent 128-type (up to) block write for fast encoding. Future protocols and optional EPC features supported through firmware updates.
Regulatory ComplianceFCC 15.247
AntennaCircular 2 dBi
Read RateUp to 200 tag/s, 50 tag/s typical
CommunicationUSB 2.0
RF Power10-22 dBm; 1 dBm increments
Read Range1 in-12 in: depending on tag type, settings and environmental conditions
Input Power5 V, 500 mA peak through USB 2.0
Upgradeable FirmwareYes
LED IndicatorsPower, Command/RFID activities
Operating Temperature-20 C to 70 C (-4 F to 158 F), non condensing
Storage Temperature-30 C to 85 C (-22 F to 185 F), non condensing
Dimensions (L*W*H)12 cm * 8 cm * 3 cm
Weight140 g
Operation EnvironmentIndoor only


1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'assetgo_tracking.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image from tb_zencart_orders_products opa, tb_zencart_orders_products opb, tb_zencart_orders o, tb_zencart_products p where opa.products_id = '989' and opa.orders_id = opb.orders_id and opb.products_id != '989' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = 1 group by p.products_id order by o.date_purchased desc limit 6]