Sirit GEN2 Reader 902 MHz (UHF-Ultra High Frequency)
Sirit GEN2 Reader 902 MHz (UHF-Ultra High Frequency) - Request Further Information About this Product
Sirit GEN2 Reader 902 MHz (UHF-Ultra High Frequency) - Overview:
Heavy duty industrial reader with listen before talk port (LBT) that can handle 1 to 4 read antennae with a capacity of 400 or more RFID tags read at a time. Software included provides extensive control over RFID reader capabilities and behavior, full antenna behavior control, an optional I/O control module and a full spectrum analyzer. Also included is a reader diagnostic tool. This unit is ideal in industrial applications where high read rates are required such as portals or loading dock doorways. One and two antenna configurations will manage most conveyor and container tracking requirements.
Sirit GEN2 Reader 902 MHz (UHF-Ultra High Frequency) - Application Usage:
Warehousing, Distribution, Shop floor.
Sirit GEN2 Reader 902 MHz (UHF-Ultra High Frequency) - Specifications:
| Display: | 4 LED's |
| Power requirements: | 12 ~ 24 VDC, 60W 2.5A maximum |
| Communications Interface: | RS232, 10/100 Ethernet Digital I/O |
| Frequency: | 860~960 MHz (UHF-Ultra High Frequency). |
| Power: | 10 mW- 1W conducted (30 dBm) |
| Read/Write Distance: | Read 0 ~ 7 M, write 0 ~ 4 M |
| Technical Certificates: | ISO 18000-6B, ISO 18000-6C |
| Antenna Connections: | 4 + 1 listening port |
| Dimensions: | L 300 mm X W 220 mm X H 56 mm |
| Weight: | ~ 3.0 Kg. |
| Housing: | Aluminum |
| Operating Specifications: |
|
| Waterproof and dustproof |
| Operating Temperature: -20°C ~+55°C |
| Storage Temperature: -40°C ~ +85°C |
| Humidity: 5~ 95 % relative |
| Multi-Detection: | Yes |
| Antenna Compatibility: | Linear or Circular polarized antenna |
| Antenna Connection: | RP SMA |
| Transponder Compatibility: | EPC Class 1 Gen 1, EPC UHF Gen 2 |
1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'assetgo_tracking.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image
from tb_zencart_orders_products opa, tb_zencart_orders_products opb, tb_zencart_orders o, tb_zencart_products p
where opa.products_id = '594'
and opa.orders_id = opb.orders_id
and opb.products_id != '594'
and opb.products_id = p.products_id
and opb.orders_id = o.orders_id
and p.products_status = 1
group by p.products_id
order by o.date_purchased desc
limit 6]