UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna
UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Overview
UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Specifications
UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Request Further Information About this Product
UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Overview:
This Gen 2 RFID reader/writer with integrated antenna is the ideal solution for both single and dual antenna applications. The reader’s electronics and a high-performance, circularly polarized antenna both reside in a single package that results in a simple, inexpensive and low profile RFID installation. Its small footprint uses less than half the real-estate of a typical reader and antenna system. A second antenna port enables 2-antenna applications.
Power over Ethernet (POE) capability allows power to be delivered over properly-equipped local area networks, eliminating expensive AC wiring installation. A standard AC/DC power converter is provided if POE is not available.
The reader communicates via the popular Alien Reader Protocol. A well-documented SDK featuring .NET and Java libraries enables easy development of custom interfaces to control the reader if desired. The reader also ships with handy Alien RFID Gateway software that enables the user to begin solution development immediately.
Back to Top
UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Specifications:
Supported RFID Tag Protocols |
EPC Gen 2; ISO 18000-6c |
Reader Protocols |
Alien Reader Protocol |
LAN Protocols |
DHCP, TCP/IP, NTP |
Dense Reader Management |
Dense Reader Mode, Event triggering |
Frequency |
902.75 MHz – 927.25 MHz |
Channels |
50 |
Channel Spacing |
500 KHz |
RF Power |
Max; 4 watts EIRP with internal antenna |
Power |
24 VDC supplied via an AC/DC converter or POE (IEEE 802.3af).
Unit ships with a Power Sourcing Equipment (PSE) module |
Communications |
RS-232 (DB-9 F), LAN TCPI/IP (RJ-45) |
Antennas |
One internal, one external port with RTNC connector |
General Purpose Inputs/Outputs |
2 inputs, 2 outputs, TTL compatible |
Dimensions |
(L) 9.13” x (W) 9.0” x (D) 2.0” |
Weight |
1.0 kg (2.2 lb) max |
Operating Temperature |
0°C to +50°C (32°F to +122°F) |
LED Indicators |
Power, LAN Link, LAN Active, RFon, Read, Fault |
Software SDK |
Java and .NET APIs |
Compliance Certification |
Emissions: FCC Part 15
Safety: UL 60950 |
Back to Top
1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'assetgo_tracking.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image
from tb_zencart_orders_products opa, tb_zencart_orders_products opb, tb_zencart_orders o, tb_zencart_products p
where opa.products_id = '712'
and opa.orders_id = opb.orders_id
and opb.products_id != '712'
and opb.products_id = p.products_id
and opb.orders_id = o.orders_id
and p.products_status = 1
group by p.products_id
order by o.date_purchased desc
limit 6]