UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna


UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Overview

UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Specifications

UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Request Further Information About this Product

UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Overview:

This Gen 2 RFID reader/writer with integrated antenna is the ideal solution for both single and dual antenna applications. The reader’s electronics and a high-performance, circularly polarized antenna both reside in a single package that results in a simple, inexpensive and low profile RFID installation. Its small footprint uses less than half the real-estate of a typical reader and antenna system. A second antenna port enables 2-antenna applications.

Power over Ethernet (POE) capability allows power to be delivered over properly-equipped local area networks, eliminating expensive AC wiring installation. A standard AC/DC power converter is provided if POE is not available.

The reader communicates via the popular Alien Reader Protocol. A well-documented SDK featuring .NET and Java libraries enables easy development of custom interfaces to control the reader if desired. The reader also ships with handy Alien RFID Gateway software that enables the user to begin solution development immediately.

Back to Top

UHF 902.75 MHz – 927.25 MHz Gen 2 RFID Reader with Integrated Antenna - Specifications:

Supported RFID Tag Protocols

EPC Gen 2; ISO 18000-6c

Reader Protocols

Alien Reader Protocol

LAN Protocols

DHCP, TCP/IP, NTP

Dense Reader Management

Dense Reader Mode, Event triggering

Frequency

902.75 MHz – 927.25 MHz

Channels

50

Channel Spacing

500 KHz

RF Power

Max; 4 watts EIRP with internal antenna

Power

24 VDC supplied via an AC/DC converter or POE (IEEE 802.3af).
Unit ships with a Power Sourcing Equipment (PSE) module

Communications

RS-232 (DB-9 F), LAN TCPI/IP (RJ-45)

Antennas

One internal, one external port with RTNC connector

General Purpose Inputs/Outputs

2 inputs, 2 outputs, TTL compatible

Dimensions

(L) 9.13” x (W) 9.0” x (D) 2.0”

Weight

1.0 kg (2.2 lb) max

Operating Temperature

0°C to +50°C (32°F to +122°F)

LED Indicators

Power, LAN Link, LAN Active, RFon, Read, Fault

Software SDK

Java and .NET APIs

Compliance Certification

Emissions: FCC Part 15
Safety: UL 60950

Back to Top