Embedded HF RFID Reader Module

RFID Benefits News Room About Contact RFID Resources Inquire Career

Innovation

Design

»»»

RFID TECHNOLOGIES

RFID PRODUCTS

RFID SOLUTIONS

Product :: RFID Embedded :: 13.56 MHz. RFID M2 Module

Product 7/16

larger image

Ordering part:

713008 - CF-format

713009 - MH-format

Overview
The SkyeModule™ M2, industry's most secure multi-protocol embedded HF RFID reader module for OEMs, was designed specifically for contactless financial transactions and encrypted authentication across a range of vertical markets.
Based on the same security standards used by the U.S. Department of Defense and financial sector, the SkyeModule M2 provides rich HF tag/protocol support and optimal performance for RFID embedded applications.
The SkyeModule M2 has been created specifically for several applications that share common requirements for tag support, protocol, performance, and security.
Applications
Features:
Anti-counterfeiting
Miniscule footprint - 49% smaller than a business card
Contactless Payment
Greatest tag compatibility with Tagnostic® and TagIQ™
Handheld Reading/Encoding
Minimal power consumption and maximum read range
Item-Level Inventory Management
Software Adjustable Host Interfaces: UART (TTL), SPI, USB
Patron Management
7 General Purpose I/O
Patient Safety
Peripheral devices for encryption algorithms and key storage
Printing/Encoding
Simple and intuitive API

Software and Security
Software
ReaderWare (RW) Encryption
RW Clone/Tamper Protection
ReaderWare C API
DES, 3DES & AES
SHA & MD5 secure hashing
SkyeTek Protocol v3
MIFARE and CryptoRF1 support
Pseudo-Random Number
Field upgradeable firmware bootloader
Extensible security via SAM
Generator (PRNG)

Transponder Support
Air-Interface2
Manufacturer
Product Name
Memory (bits)
ISO14443A
NXP (Philips)
MIFARE Ultralight
512
ISO14443A
NXP (Philips), Infineon
MIFARE
8k, 32k
ISO14443A
NXP (Philips)
DESFire
32k
ISO14443B
Atmel
AT88RF020, AT885C CryptoRF1
2k, 1k - 64k
ISO14443B
ST Microelectronics
SR176, SRI512, SRIX4K
176, 512, 4k
ISO15693
Fujitsu
MB89R118
16k
ISO15693
Infineon
my-d (limited)
2k
ISO15693
NXP (Phillips)
I-CODE SL1, SL2 ICS10, SL2 ICS20
512, 136, 1k
ISO15693
ST Microelectronics
LRI-64,-512,-2K, -2KS
64, 512, 2k
ISO15693
TagSys
C370
1k
ISO15693
Texas Instruments
Tag-it HFI Std, Pro, Plus
256, 2k
Proprietary
NXP (Philips)
I-CODE SL1 ICS30, EPC SL2 ICS10
136, 512

Frequency
13.56 MHz ± 7 kHz
Peripheral I/O Connection
7 programmable GPIO pins
ISO 7816 smart card slot
Current Consumption
Sleep Mode: 4 mA
Idle Mode: 75 mA
Scan Mode: 175 mA
Physical CF MH
Length: 66 mm 70 mm
Width: 36 mm 53 mm
Height: 5 mm 9 mm
Weight: 8.7 g 10.5 g
Compliance3
FCC 15.225 EN 300-330
EN 301-489 EN 61000-4-3
AS/NZS 4268:2003 DGT LP002
HKTA 1035 IDA TS SRD
RoHS
Antenna Options
Internal or 50 Ω MMCX (female)
output for external connection
Environment
Storage Temperature: -20°C to 85°C
Operating Temperature: -10°C to 70°C
Transponder
Communication Rate
ISO 14443A: 106 kbps
ISO 14443B: 106 kbps
ISO 15693: 26 kbps
Effective Range
Vicinity, Internal Antenna: 8 cm
Vicinity, External Antenna: 16 cm
Proximity, Internal Antenna: 3 cm
Proximity, External Antenna: 8 cm
Host Interfaces/Data Rates
RS232 (Serial UART): 9.6-115.2 kbps
SPI: Mode 1 up to 4 Mb/s
USB: 2.0 Full Speed 12 Mb/s
I2C: 40 kHz
Air-interface Protocols
ISO 14443 A/B (parts 1-4)
ISO 15693
Output Power
Adjustable between 17-23 dBm sustained
(read range and rate are subject to
specific environmental conditions)
Supply Voltage
5.0 V ± 10%

Product 7/16

1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'assetgo_tracking.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image from tb_zencart_orders_products opa, tb_zencart_orders_products opb, tb_zencart_orders o, tb_zencart_products p where opa.products_id = '685' and opa.orders_id = opb.orders_id and opb.products_id != '685' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = 1 group by p.products_id order by o.date_purchased desc limit 6]